The BandMaster V has 12 relay outputs which can configured in up to 16 different combinations. No diode matrix is needed for antennas used on multiple band. Antennas are easily assigned to each band. The band data interface operates in output mode when any of the other data interfaces are used for your radio.Ĭonfiguring the BandMaster V is easily done from the front panel. When operating in band data mode the BandMaster V will output data on both the CI-V and RS-232 interfaces with the frequency fixed to the middle of the current band. The band data interface operates in input mode when using band data from a Yaesu or Elecraft radio. The BandMaster V contains a fully bi-directional band data interface. Introductions were made by all Board members present. The official meeting was called to order at 9:00 am, December 5, 2014, by President Linda Mann. The USB interface may be connected directly to a Flex SDR with no additional cables or interfaces required. December Bulletin 2014 page 2 Florida Bandmasters Association Hilton Daytona Beach - Dayton Beach December 4-6, 2014 An open discussion was held Thursday night from 7:00 pm-9:30 pm. The USB interface may be connected to your PC for radio control.
In reverse, when using a radio on the RS-232 interface the BandMaster V will out 4-bit band data as well as an ICOM CI-V data stream. In other words, if you are using an ICOM radio on the CI-V interface the BandMaster V will output 4-bit band data as well as RS-232 data in Yaesu or Kenwood format. All channels are active simultaneously and provide data translation for your station accessories.
#Bandmaster online 2014 full#
The BM-5 BandMaster V is a full featured unit that contains a universal band decoder and antenna switch controller.
0 kommentar(er)
